极品白丝尤物自慰溢水_国产精品丝袜在线一区_中文有码无码av片_乱伦日本亚洲欧美_欧美www在线观看_黄色一级视频网址_手机看片1024国产免费你懂的_少妇张开双腿自慰流白奖_内射频类软件免费_双飞性感美妞91

PVDF氟碳彩鋼板涂層和金屬的完美結合使材質的功能和形態發揮到了極致，是城市建設重點工程、公共及民用建筑、體育場館、建筑金屬幕墻、電廠、化工企業等重點工程彩板的較佳選擇。

The perfect combination of PVDF fluorocarbon color steel plate coating and metal makes the function and form of the material come to full play. It is a better choice for key projects of urban construction, public and civil buildings, stadiums, building metal curtain walls, power plants, chemical enterprises and other key projects.

薄鋼板經冷壓或冷軋成型的鋼材。鋼板采用有機涂層薄鋼板（或稱彩色鋼板）、鍍鋅薄鋼板、防腐薄鋼板(含石棉瀝青層)或其他薄鋼板等。壓型板具有單位重量輕、強度高、抗震性能好、施工快速、外形美觀等優點,是良好的建筑材料和構件,主要用于圍護結構、樓板，也可用于其他構筑物。根據不同使用功能要求，壓型板可壓成波形、雙曲波形、肋形、 V形、加勁型等。

Thin steel plate formed by cold pressed or cold rolled steel. The steel plate adopts organic coating thin steel plate (or color steel plate), galvanized thin steel sheet, anti-corrosion thin steel plate (including asbestos asphalt layer) or other thin steel sheet, etc. Press plate has the advantages of light unit weight, high strength, good seismic performance, fast construction, beautiful appearance and so on. It is a good building material and components, mainly used for envelope structure, floor, can also be used for other structures. According to different functional requirements, the pressing plate can be pressed into waveform, hyperbolic waveform, rib, V, stiffening, etc.

屋面和墻面常用板厚為0.4～1.6毫米；用于承重樓板或筒倉時厚度達 2～3毫米或以上。波高一般為10～200毫米不等。當不加勁時,其高厚比宜控制在200以內。當采用通長屋面板,其坡度可采用2～5%，則撓度不超過l/300(l為計算跨長)

The thickness of roof and wall is 0.4~1.6 mm; 2~3 mm or above for load-bearing floor or silos. The wave height generally ranges from 10 to 200 mm. When not strenuous, its high thickness ratio should be controlled within 200. When the long roof panel is used, the slope can be 2~5%, then the deflection shall not exceed l / 300 (l is the calculated span length)

壓型板因原板很薄，防腐涂料的質量直接影響使用壽命，為了適應加工和防銹要求，涂層鋼板需按有關規定進行各項檢驗。一般情況下薄鋼板也可根據使用要求，經壓型后再涂防銹油漆，或采用不銹鋼薄板原板。

Because the original plate is very thin, the quality of the anticorrosive coating directly affects the service life. In order to meet the requirements of processing and rust prevention, the coated steel plate should be inspected according to the relevant regulations. Under normal circumstances, sheet steel can also be used according to the requirements, after applying anti-rust paint, or using stainless steel sheet original plate.

壓型板用作工業廠房屋面板、墻板時，在一般無保溫要求的情況下,每平方米用鋼量約5～11公斤。有保溫要求時，可用礦棉板、玻璃棉、泡沫塑料等作絕熱材料。壓型板與混凝土結合做成組合樓板，可省去木模板并可作為承重結構。同時為加強壓型板與混凝土的結合力，宜在鋼板上預焊栓釘或壓制雙向加勁肋。

When the pressing plate is used as the industrial workshop house panel and wall board, in the case of no insulation requirements, the steel volume per square meter is about 5~11 kg. When there are insulation requirements, mineral wool board, glass wool, foam plastic can be used as insulation materials. The pressing plate is combined with concrete to make a composite floor, which can save wood formwork and be used as a load-bearing structure. At the same time, in order to strengthen the combination of pressing plate and concrete, it is appropriate to pre-weld bolt nail or press two-way reinforcing rib on the steel plate.